Often the butt of many jokes on Twitter and dismissed by many experienced athletes. I believe running power is a misunderstood technology which can provide an athlete with unparalleled insight into their training. Here I want to give a more balanced introduction to running power for those considering it.
The running power meter was inspired by the bicycle power meter, which collects data from a strain gauge in a pedal, crank arm or wheel hub to calculate how much force is being applied by the athlete. This allows them to pace and race better on hills, into headwinds, at altitude and in the heat. The running power meter is not a true power meter in the respect that it is based on an algorithm, using accelerometers rather than a strain gauge. Combined with the pace at which an individual is running to generate a number measured in watts, this gives the athlete an insight into how much energy they are expending to achieve forward momentum.
As a runner, I would put money on you having trained with pace, heart rate and RPE in the past. So to start with I’ll break the pros and cons of each method down to help you make the right decision for your training.
Rate of perceived exertion is how hard you feel you are running, whether you are going eyeballs out in a race (RPE of 10) of gently jogging along on an easy run (RPE of around 4). It’s an important skill to develop for runners of all abilities even if they also use technology, as data doesn’t have all the answers and can fail at any point.
- If you are having a bad day, RPE will make sure you don’t over exert yourself and push you towards exhaustion or overtraining
- It removes the risk of setting targets that are too high/low for an event
- Newer runners will struggle to understand what their bodies are telling them, and may be based on what they perceive as “getting a good workout” rather than achieving the goals of the session
- Will cause most runners to head out too fast when fresh, then fade as they didn’t pace themselves well enough
- Difficult to accurately measure training load, fitness or fatigue
- Requires many years of experience to dial in, and even then the best of us make mistakes
- Heart Rate gives us an unparalleled insight to how the body is performing, if your heart rate is outside of normal parameters, your body is trying to tell you something. This helps us avoid overtraining by pushing too hard
- Relatively inexpensive, most modern running watches will come with a heart rate monitor built in or come with a free chest strap
- Tracking your heart rate over time provides a valuable insight into how well your body is adapting to exercise.
- There is a large delay between your body’s exertion and and an increase in heart rate, so it is difficult to use it to pace races with lots of hills/surges as the feedback isn’t immediate, and your heart rate may continue to rise for up to 30 seconds after a tough section
- Lots of factors outside of training can artificially inflate our heart rate. A lack of sleep, high levels of stress, temperature, altitude and mensural cycle to name but a few will all affect our heart rate and may result in us running faster/slower than we should
- Prone to dropouts or false readings. Where 10BPM is a huge difference, battery or connection issues can leave you vulnerable
- Sticking to heart rate based training can be incredibly frustrating for new athletes as they feel they need to walk to keep their heart rate in the correct zone
Pace is probably the most popular method of measuring running intensity, and is still the most important. Let’s assume I put a running power meter on the foot of every athlete starting a 5K run. The winner wouldn’t be the one who put out the highest number of watts or the best horizontal power. It would be the one who ran the fastest. However there are issues when using a GPS watch to measure pace
- Cheap, comes with all fitness tracking devices, or you can use you phone
- The winner of the race is the athlete who runs the fastest, so it’s the purest way of tracking intensity
- GPS watches can lose signal, or struggle to find it in areas such as woodland or around high rise buildings
- Large events place so much strain on GPS systems that they cannot keep up. This resultis in athlete’s watches giving false readings, and getting out of sync with the race organiser’s distance markers. This can result in widespread confusion and frustration
- GPS watches are very sensitive to changes in direction. They expect you to continue running in a straight line. Making a U turn or sharp corner can leave the GPS struggling to catch up
- It does not take gradient or headwind into account. If you are running up or down a hill, pace data is of very little use
- Susceptible to headwinds
Finally, this brings us onto the running power meter. For my money, this goes a long way to correcting the flaws of other methods:
- Takes hills and wind into account (new generation Stryd only)
- Provides advanced running metrics such as stride length, ground contact time, running efficiency, form power and leg spring stiffness
- Reliable data in all situations
- Measures distance precisely using the accelerometer inside the power meter, giving you an exact pace rather than GPS estimate
- Allows you to track improvements easily
- Unparalleled treadmill accuracy
- Can be confusing at first, requires time investment
- Expensive, at £200 for a Stryd unit, on top of a compatible watch, it’s a definite investment in your running
- The data can become all consuming, and athletes run the risk of losing sight of the bigger picture (running faster)
- Any long term changes in athlete weight require re-calibration and redundancy of previous data
- Can be tricky to use if you are aiming for a specific finish time
The biggest benefit for running power for me is consistency and the low margin for error. While the algorithm behind running power is up for scrutiny, as long as the data that is outputted is consistent that’s the most important thing. Whether an athlete is running on a treadmill, up an alpine pass, a road marathon or simply on a jog with friends, I know I have good data which represents their effort, using it to track improvements and calculate fatigue.
Hopefully that has given you an insight into the advantages of using running power over other methods. Next up I’m going to delve into a bit more of the science:
What is running power?
Running power is measured in the arbitrary measurement of a running watt. This is a combination of force (in newtons) and speed (metres per second), with higher numbers translating into faster running. When you hit a hill the power meter will recognise this and increase the power to represent the additional effort you are using to fight gravity. On the downhills it will recognise the gravitational assist and lower the power number to represent the reduced level of force you are having to generate yourself. This helps us pace our runs much more accurately.
Training with Running Power
Hopefully by now the concept sounds appealing at the very least. So how do you get started? First off you need a running power meter. I would recommend against any power meter which generates numbers based on speed derived from a GPS signal. This will normally involve an algorithm which looks at your cadence and your speed to generate an estimation of power. For my money though, it’s not worth the paper it’s written on. Running power in itself is an algorithm. So an algorithm that is required to generate another algorithm has a large margin of error. I use a Stryd footpod which is easily the most popular running power meter available currently. I will be writing the rest of this article on the assumption this is what you are using.
These numbers, like those from a cycling power meter are fairly meaningless without a benchmark. Is 250W a lot? What should you be hitting in your intervals? Is there a number you should be staying below during your event? When is your run too easy? To find the answer to these questions, we need to find a threshold, a point where an effort becomes unsustainable. The simplest way to use this is to use the Stryd auto CP (critical power) calculator. This harvests the data from all of your runs to give you an estimation of your ability. It’s important you feed it a variety of data points, from sprints to 5Ks and long runs. Don’t expect an accurate number after a few easy runs.
Zone training is nothing new as we have zones for pace and heart rate. What’s different here is the fact that threshold is calculated by looking at thousands of data points rather than a single point. This means our threshold is much more accurate. It also updates automatically with time. Smash out a big hill session which included your best two minute power? Your threshold may improve by a couple of watts. Absolutely storm that cross country race? You may see a nice big boost to represent that. It’s important to note that these are based on a 90 day rolling average, so any data older than 90 days will disappear. This can result in sudden increases/decreases to your threshold power even if you’ve spent the day on the sofa.
The way our power threshold updates itself automatically reduces the need for formal testing every 6-8 weeks. For me this is arguably the biggest benefit of running power. Ensuring your threshold is always up to date.
I don’t like running on a treadmill, however, sometimes it’s a necessary evil. This can be due to the weather, or when we’re in a country where wearing sports clothing in public is not appropriate. One of the frustrating issues I encounter as a coach is accurately recording treadmill workouts. Treadmills vary significantly in accuracy, and the indoor running mode included on sports watches leaves a lot to be desired.
You may be lucky enough to have access to an indoor running facility such as a sprint track or even a full 400M. The lack of GPS signal can be a issue if we want detailed information from our session, but a running power meter provides us with all the information we need, without the GPS accuracy issues which plague even outdoor tracks.
Running with power is the perfect way to record your indoor runs as we get meaningful figures that can be directly compared to your outdoor runs. In fact, I’d go so far as to say that if you’re a serious runner who trains indoors regularly, a running power meter is an essential purchase.
My preferred way to train on the treadmill is using Zwift. This is software which takes you through a virtual world as you run where you can also join races and complete workouts. It’s free for runners and pairs with your power meter, so download it and give it a go.
Post Run Analysis
Once you get back from your run your watch will upload your data to an analysis platform of choice. Most software now supports running power, however the level of support varies considerably. If you are a basic user the Stryd Power Centre will offer enough information for you, with the bonus of being free. TrainingPeaks offers some basic functionality, but if you are a serious runner only looking to analyse data, and have little to no interest in purchasing a TrainingPlan then I recommend using WKO instead. It costs the same as a year of TrainingPeaks premium with far greater support for running power. There’s a steep learning curve however, so if you’re a new runner this is probably overkill.
Assuming your threshold is accurate, you will be able to see in detail how hard you ran. This data will be far more insightful than pace or heart rate, and pick up small, rapid changes much better. This could be jumping over a fallen tree or sprinting for a couple of strides to make it across the road before the lights turn green. While these aren’t necessarily actionable data points, the power meter ensures that these efforts are recorded and reflected in your training load calculations.
If you are so inclined, you can take a real deep dive into your data looking at the advanced metrics offered by WKO. Here you can see your leg spring stiffness, duty factor, percentage of power generated horizontally or vertically, and all manner of other metrics, which I’m not going to go into here.
Two metrics that are worth paying attention to however are running efficiency and horizontal power.
Running efficiency (RE) looks at how effective you are at turning watts into speed. As you may remember, higher speed means higher watts. But you can also create power simply by jumping up and down on the spot, so this metric looks at how efficient you are. Running efficiency is quite a finite metric, but when running at threshold, anything below 0.97 requires improvement, 1.0 is a good score, and 1.03 or above is likely the realm of elite runners. An improvement in RE over time at the same pace/power suggests that you are improving as a runner.
Percentage of power generated in a horizontal plane (or horizontal power) tells you how much power generated is transferred into forward momentum. As mentioned above, you can create power by jumping up and down on the spot, which would create 0% horizontal power, and 100% vertical power. You can’t create 100% horizontal power, but if you can get it up to around 75-80% this suggests you are moving fluidly.
These metrics will vary from run to run, and will be lower on easy or hilly runs so make sure you’re only comparing these with like for like runs.
The real danger here is getting lost in the numbers and over analysing every single data point. Or believing you aren’t capable of more than the software’s predictions. We should still be runners at heart, hitting the roads/trails for fun and the challenge of pushing our limits. Running power data is so in depth we can run the risk of becoming data analysts first instead of athletes.
Running Power for Triathlon
So, if you’re a triathlete, how does this fit into your training? How can you use it to run faster off the bike? The answer is in form power.
When we run off the bike we’re never going to run as well as we will at a standalone event. Depending on your event and ability you may be up to ten hours into the race at this point. Your legs will be tired and stiff from the repeated pedalling action on the bike. Your mobility may be impaired and your legs will be fatigued. This can mean you find yourself not running as quickly as you’d like. Add to this the accumulation of fatigue over the rest of the run and pace isn’t as useful.
Running power takes this into account. It recognises that you’re putting in the effort, even if you’re not travelling as quickly as you would normally. This is form power, it looks at the vertical and lateral movement from the foot compared to the horizontal power which we touched on above. While generating a high amount of form power is bad news for our running, what’s worse is not taking this into account and pushing harder because we feel we’re slacking off.
This becomes imperative to our pacing. We may know we can hold 5:00 for a marathon when fresh, but after a hard 180Km on the bike this may be 5:20, maybe even 5:30. If we stick to our guns (and pride) aiming for 5:00 per KM we could well be slowly running ourselves into the red. Aiming for a power target instead takes our loss of form into account, ensuring we focus on what our body is doing, as opposed to what we think it should be doing.
So, you may be wondering why more people don’t run with power at this point. I’ll break down a few most common issues people have with running power
Elite athletes don’t use it
It’s true, not many professional runners use Stryd. There are some notable exceptions such as Ben Kanute and Olympic Triathlon Champion Gwen Jorgennson. More often than not this is the choice of their coach rather than the athlete, who will adapt an “If it isn’t broke, don’t fix it” approach. Truth be told, if I had an athlete who was winning races training with pace and/or heart rate, I probably wouldn’t suggest they switch to running power. Elite athletes are often training at a level where they can’t afford to try something new, especially going into an Olympic year, so they stick to what they know.
Some very successful coaches out there won’t even want their athletes to wear watches. They’ll stand next to the start/finish line of a track with their stopwatch, barking splits out to runners as they complete every lap. While this is an extreme example, many coaches who qualified in the 20th Century aren’t interested in opening their minds to new training methods. There is nothing inherently wrong with this if they’ve been coaching for 30 years and had great success with their current methods, but they may not be getting the most out of their athletes.
This also extends to athletes who may not understand what running power is, how to set it up, or how to use it to make themselves faster. To them it’s just a number that appears on their watch. I hope to demystify it in more detail with more articles in future.
Just not appealing
For some, training with heart rate and pace is enough, or even too much in some cases. If you live a very busy life and don’t have the time, headspace or inclination to look through your numbers after a run. For some, running is a time for them to switch off, lose themselves in nature, or blow off some steam. And there’s nothing wrong with that.
It’s not a “mature technology”
It’s true that our understanding of running power is accelerating at a rapid pace. In fact it could be argued that the entire concept is in beta testing with rapid developments and new interpretations of the data on a regular basis. The concept is based on an algorithm and it’s hard to see how that could be changed currently, so it’s hard to see it becoming as reliable as cycling power any time soon. That being said, look at the way Team Sky and British Cycling advanced the knowledge of cycling power, first developed in the 80s, to emerge as a dominant force in 2012. There is a lot of potential in running power, and early adopters with the right guidance can capitalise on its benefits.
Early versions were poor
Running power meters first arrived on the scene back in 2015 with the Stryd chest strap. By the company’s own admission more recently, it left a lot to be desired. New generations have improved the accuracy and the stability of running power significantly.
The best thing of all though? Just because you record running power doesn’t mean you can’t also run with pace, heart rate or RPE. You can record all four at once, and choose whichever you want to dictate the intensity of your workout. Following a MAF plan? Increases in power can reassure you the training is working.
It may be you want a running power meter simply to record your pace more accurately, or you’re only interested in a single metric such as leg spring stiffness or horizontal power. As with everything in our sport, you only need to take it as seriously as you want. If you have the cash I recommend you give it a go though. It may be just what you need to take your running to the next level.
There are limited resources out there for running power, but I have a few recommendations:
Palladino Power Project
Steve Palladino is an accomplished running coach who has invested heavily in running power, and has created a Facebook group to act as an open forum to discuss running power. With up to date information and good discussions, I recommend you join: https://www.facebook.com/groups/PalladinoPowerProject
Run With Power by Jim Vance
Unfortunately this book is slightly out of date now and I’m hoping for a second edition. However it’s still the primary source of information for running power.
The Secret of Running by Hans van Dijk and Ron van Megen
This is a more up to date book which includes useful information on Running Power
As a company, Stryd have done a good job of creating a number of resources for runners. This includes articles on their website, their podcast and their Facebook group where runners can ask questions and discuss training with Stryd staff https://www.facebook.com/groups/strydcommunity
I hope this has opened your eyes to the potential benefits of running with power. If you have a running power meter and are struggling to understand your data, why not book in a coaching consultation with us here where we can talk you through the process and help get your training on track.